Siemon Cat 6A F/UTP Pure Copper Ethernet Cable 305M
by Siemon
KES 38,000 Excl. Tax
- Tri-layer “TL” UTP LSOH
- 0.57mm (.022 in.) 23 AWG solid bare copper
- 7.3mm (.287 in.) nom. jacket diameter
- Central isolation member
- Mylar Tape.
- Tri-layer laminated polyethylene over aluminum applied over core
- Reverse sequential measurement markings on jacket
| SKU | 4433 |
|---|
Reviews
Description
Siemon Cat 6A F/UTP Pure Copper Ethernet Cable 305M
Siemon’s Cat6A F-UTP cable is a three-layer barrier made up of conductive and non-conductive parts for a typical UTP installation process and smaller cable diameter while providing better heat dissipation and external crosstalk practically zero.
These properties make Cat6A FUTP cable a good choice for supporting applications using both remote power and application performance speeds of 10 Gb / s such as IEEE 802.11ac wireless access points. or IEEE 802.11ax or other emerging or converging high-speed IP technologies.
Siemon Category 6A F-UTP Cable Construction.
- Jack
- Tri-Layer barrier
- Isolation MemberMylar tapes
- Conductor
- Insulation
Specifications.
- Cat6A LSOH F/UTP 4-Pair Cable.
- The Cable is 23 AWG made from solid bare copper.
- The jacket diameter is 7.4mm.
- Contains a central isolation member.
- The shield is made from aluminum foil tape enclosing a 7-strand 0.05mm tinned copper drain wire.
- Complies with TIA-568-B.2-10, IEC 61156-5 ED 2.0 (2009), IEC 60754, IEC 61034, LSOH: IEC 60332-3C, UL CM and IEC 60332-1, UL CMR and CSA FT4.
- Supplied in a Violet LSOH jacket on 500m reels