DGS-1010MP 10-Port Gigabit PoE Switch

The DGS-1010MP 10-Port Gigabit PoE Switch provides Gigabit connectivity and power for small offices and business networks. It includes eight Power over Ethernet access ports, one Gigabit copper uplink, and one Gigabit SFP uplink. Therefore, installers can connect and power compatible access points, Internet Protocol cameras, and Voice over Internet Protocol phones while maintaining dedicated uplink connections.

Product Overview

Eight 10/100/1000BASE-T ports support IEEE 802.3at Power over Ethernet. As a result, compatible devices can receive data and electrical power through the same Ethernet cable. The switch provides a shared 125W power budget across these ports.

One Gigabit Ethernet uplink supports copper connections, while the SFP port supports compatible fibre transceivers. Moreover, store-and-forward switching checks incoming frames before transmission. This process helps limit packet errors and supports reliable network performance.

Key Features

• Provides eight Gigabit PoE ports, allowing compatible devices to receive data and power through one cable.

• Offers a 125W PoE budget, supporting several powered devices within the total available capacity.

• Includes one dedicated Gigabit Ethernet uplink, providing a copper connection to compatible network equipment.

• Provides one Gigabit SFP uplink, supporting fibre connections through a suitable transceiver.

• Delivers 20 Gbps switching capacity, enabling efficient traffic handling across all ten ports.

• Supports plug-and-play installation, removing the need for software configuration or advanced setup.

• Uses store-and-forward switching to check data frames and help minimise packet loss.

• Supports Auto MDI/MDIX, allowing standard Ethernet cables to connect different types of equipment.

• Uses IEEE 802.3az Energy-Efficient Ethernet to lower power use during reduced network activity.

• Features a fanless design, enabling silent operation in offices and other quiet environments.

Technical Specifications

• Brand: D-Link

• Model: DGS-1010MP

• Product type: Unmanaged Gigabit PoE switch

• PoE ports: 8 × 10/100/1000BASE-T

• Copper uplink: 1 × 1000BASE-T

• Fibre uplink: 1 × Gigabit SFP

• PoE standard: IEEE 802.3at

• Total PoE budget: 125W

• Switching capacity: 20 Gbps

• Maximum forwarding rate: 14.88 Mpps

• Packet buffer: 1.5 Mbits

• Maximum power consumption: 133.8W with PoE active

• Power input: 100–240V AC

• Cooling: Fanless

• Dimensions: 280 × 180 × 44 mm

• Weight: 1.84 kg

• Operating temperature: 0°C to 40°C

• Storage temperature: -10°C to 70°C

• Operating altitude: Up to 2,000 metres

Common Applications

The DGS-1010MP 10-Port Gigabit PoE Switch suits small offices, shops, schools, hotels, and professional network camera installations. It can power compatible access points, cameras, and VoIP phones. Meanwhile, the separate copper and SFP uplinks support connections to a router, storage device, network switch, or fibre backbone.

Why Choose This Product?

This switch combines eight powered Gigabit ports with two dedicated uplink options. Consequently, organisations can expand their networks without adding separate power adapters beside every connected device. The DGS-1010MP 10-Port Gigabit PoE Switch also offers silent operation and simple plug-and-play deployment. Its energy-saving features provide additional value during long-term operation.

Frequently Asked Questions

How much PoE power can the DGS-1010MP provide?

The eight PoE ports share a total power budget of 125W. Therefore, the combined demand from connected devices must remain within that limit.

Do all ten ports provide Power over Ethernet?

Power is available through the eight Gigabit access ports. The copper and SFP uplink ports provide network connections without PoE output.

Can both uplink ports operate at the same time?

The DGS-1010MP provides separate Gigabit copper and SFP uplink interfaces for additional network connections.

Does the switch need software configuration?

The DGS-1010MP 10-Port Gigabit PoE Switch uses unmanaged plug-and-play operation, so it requires no software configuration before standard deployment.