Ubiquiti UniFi USW-16-POE Managed PoE Switch for Quiet Workspaces

The Ubiquiti UniFi USW-16-POE Managed PoE Switch connects wired devices and supplies power to compatible network equipment in Kenya. Sixteen Gigabit Ethernet ports provide access connections, while eight support Power over Ethernet Plus (PoE+). In addition, two dedicated uplink slots link the switch to other network equipment. Its fanless design suits occupied workspaces, while UniFi Network gives administrators one place to configure ports and monitor connections.

A Managed Switch for Mixed Device Networks

The Ubiquiti UniFi USW-16-POE is a managed Layer 2 network switch that connects computers and compatible powered devices for offices, shops and branch networks. It combines sixteen copper Ethernet ports, two fibre uplink slots and a shared power budget, allowing administrators to organise access connections within one rack-mounted unit.

Copper Connections and Separate Fibre Uplinks

The port layout includes eight powered Gigabit ports and eight standard Gigabit ports. Consequently, teams can connect suitable access points, cameras or phones alongside computers and printers. However, powered devices must match the supported power standards, and their combined demand must remain within the available budget.

Two 1 Gigabit Small Form-factor Pluggable (SFP) slots provide uplink options without occupying the copper ports. Meanwhile, UniFi Network supports central configuration and monitoring. Virtual Local Area Networks (VLANs) help administrators separate traffic, while port isolation can restrict communication between selected connections.

Features That Simplify Daily Network Use

The switch combines flexible connections with controls for managing a shared wired network.

• Sixteen Gigabit Ethernet ports: Connect office equipment through wired links, helping keep fixed devices off the wireless network.

• Eight auto-sensing PoE+ ports: Supply power to compatible devices through Ethernet, reducing the need for nearby power adapters.

• Two dedicated SFP slots: Support suitable fibre uplinks, leaving copper ports available for local devices.

• Fanless cooling: Removes cooling fan noise, making the switch suitable for offices and other occupied rooms.

• UniFi Network management: Brings port settings and connection monitoring into a shared interface for easier administration.

• Traffic separation: Uses VLAN support and port isolation to help administrators control how groups of devices communicate.

Verified Switching and Power Specifications

The hardware provides the following port, power and management capabilities.

• Brand: Ubiquiti.

• Switch type: Managed Layer 2.

• Copper ports: 16 × 10/100/1000 Mbps RJ45.

• Powered ports: Eight, supporting IEEE 802.3af/at.

• Total shared power budget: 42 W.

• Uplink slots: 2 × 1 Gigabit SFP.

• Switching capacity: 36 Gbps.

• Non-blocking throughput: 18 Gbps.

• Cooling: Fanless.

• Form factor: One rack unit (1U).

• Power input: 100–240 V alternating current, 50/60 Hz.

• Maximum consumption: 18 W excluding powered-device output, 60 W including output.

• Management application: UniFi Network version 7.2.94 or later.

Matching the Switch to Your Site

Small offices, retail premises and branch locations suit this switch when they need mixed powered and standard Ethernet connections. However, eight powered ports do not mean eight high-power devices can run together. Therefore, add each device’s maximum power requirement before deployment. Also, allow spare capacity for changes in demand.

Technical Support and Warranty Guidance in Kenya

Technical support is available in Kenya for guidance on product selection, setup and use. Before purchase, confirm endpoint power requirements, uplink compatibility and rack space. In addition, review the planned network layout to ensure enough ports remain available. Warranty terms for this product are confirmed before purchase.

Why Choose the Ubiquiti UniFi USW-16-POE Managed PoE Switch?

The Ubiquiti UniFi USW-16-POE Managed PoE Switch combines quiet operation with central management and a practical mix of ports. Moreover, dedicated uplinks preserve local connections, while Ethernet power simplifies endpoint cabling. For installations with modest power needs, these features support an orderly network that administrators can monitor and adjust.

Frequently Asked Questions

Is the 42 W power budget available on every powered port?

The 42 W budget is shared across all eight powered ports. Therefore, total connected-device demand must stay below that figure.

Are the two SFP uplinks 10 Gigabit connections?

The SFP uplinks operate at 1 Gigabit each. Choose compatible modules and plan upstream capacity around that limit.

Can the switch supply power through all sixteen copper ports?

Eight copper ports provide PoE+ power. The remaining eight provide Ethernet data connections.

What should Kenyan buyers check when choosing devices to power?

Buyers should check each device’s power standard and maximum consumption. Technical support in Kenya can provide general selection guidance.

Choose the UniFi switch from Almiria Kenya and get technical support for selection, setup and everyday network use.